Automatic Wire Harness Taping Machine
Select “Full wrapping”, tread on foot pedal to start operating, press “Wheel closure switch”, the machine operates at full speed and stops operation when the foot pedal is released.
Select point wrapping, enter the number of circles you want, tread on foot pedal to start operating, the machine will not stop until the number of circles reaches without treading on foot pedal.
Select “Multi-segment wrapping”, and then press “Multi-segment setting”. 50 segments are provided for setting. You can set according to the length of wire branch. You should set as required and the remaining is left. Tread on the foot pedal, the machine will stop automatically after the first segment is completed, and then you should tread on the foot pedal again and the machine will complete the second segment operation, as so on. After the last segment is completed, you should press “Reset” to start the production of a second line.
The tape width is 20MM generally; width setting will directly affect the wrapping density.The smaller the width is, the larger the overlap surface is. The bigger the width is, the smaller the overlap surface is.
The maximum speed is 5, the minimum speed is 1.
Number of turns for point wrapping:
Set the number of circles for point wrapping
Edge size can be adjusted according to wire diameter for two wheels.
Parameter setting is only available for administrator
Operating mode: touch screen, foot pedal
Working mode: full wrapping, point wrapping, multi-segment wrapping
Power supply: AC110V～AC220V
Air pressure: ≥4P
Wrapping length: infinite
Wire diameter: 3MM-40MM
Tape specifications: inner diameter: 38MM, outer diameter: ≤￠140MM, width: ≤20MM (in case of other tape size, please customize tape holder as required)
Tape type: PVC / lint / acetate tape (no interleaving paper), etc.
Working temperature: 0-45℃
Humidity: 10-90%RH (no condensation)
Cooling mode: Natural wind
Max frequency: 12R/S