Six wire double end terminal single end welding glue shell

1、Basic Requirements

Fully automatic six wire crimping terminal into rubber housing

（1）OD1.3 wire cutting, peeling, double end pressing terminal, single end rubber housing, ultrasonic welding.

   (2)Wire length: 60MM-800MM.

2、Equipment parameters

• Product model: KS-T Series

• Equipment functions: wire cutting, peeling, terminal pressing, rubber housing, ultrasonic welding.

• Maximum production capacity: 450 sets per hour for 6 core wires within 500mm long.

• Processing wire: 18-24AWG.

• Cutting range: 60MM-800MM.

• Detection function, insufficient air pressure inspection, wire detection, poor crimping detection, and rubber shell detection.

• Power supply: AC220V/50HZ (single-phase).

• Air pressure: 0.6-0.7Mpa.

• Length of main engine: 163CM, width: 110, height: 160CM.

• Operating weight: 550KG.

• Main configuration: 8-axis control, 7-inch color human-computer interface.

3、Overall dimensions of equipment

4、Schematic Diagram of Machine Location