What problems will occur when the blade of the tin dipping machine is worn?
The blade of the tin dipping machine is a necessary part, but it is easy to wear due to frequent cutting for a long time. What problems will occur after the blade of the tin dipping machine is worn?
1、 Uneven section
If the blade is worn and has a gap, the cutting section of the harness may be uneven. In this way, according to the requirements of harness production, some strict products will directly belong to defective products, which need to be reworked or even scrapped.
2、 Incomplete harness cutting
The blade is severely worn, resulting in incomplete cutting. The rubber part of the harness may be completely separated due to the pulling of the harness. From the naked eye, it is also cut, but it will bring potential quality problems to the harness production, and ultimately lead to unstable harness quality.
3、 Blade offset
Due to the wear of the blade, the force on the blade may be uneven, resulting in a slight offset of the blade. When the threshold value is exceeded, various problems may occur in the harness production, which may be discovered after a period of time.