Automatic Wire Stripping and Crimping Machine - KINGSING

  1. Home page
  2. Services
  3. Industry News

The relationship between the wire stripping machine tool value and the working cutting depth

2022-11-11 11:39:02 美工

There are many small skills in the use of the wire stripping machine. Only those who have used the machine for a long time can realize that some problems can only be understood through years of accumulation. For example, when we can't find the cause of some small problems and small faults that will occur during the use of the wire stripping machine, teachers who have used the machine for many years can know what the cause is. Today, we bring you the problem of the blade value of the wire stripping machine in the work, The blade value of the wire stripping machine is used to adjust the cutting depth. However, for some wire stripping machines, the cutting depth cannot be directly determined by the set value.

For general computer wire stripper, although the blade value can control the cutting depth, it is not one-to-one. For example, when the blade value is A, the cutting depth is B, but when the blade value is adjusted to A-1, the cutting depth cannot be B-1 immediately. Since the general computer wire stripper is operated and adjusted through a single pulse, when adjusting the knife value, only fine tune the pitch line until the ideal situation is achieved.