Automatic Wire Stripping and Crimping Machine - KINGSING

  1. Home page
  2. Services
  3. Industry News

The following 9 problems should be noted in the terminal wire processing process

2022-12-01 15:49:30 美工

The following nine problems should be paid attention to in the terminal wire processing process. The terminal wire processing process is divided into many processes. Generally, the terminal wire processing process needs to be very careful to avoid failure factors caused by poor processing.

1、The wire cutting process of terminal wire requires that the wire length should be within the tolerance range, and should not be too long or too short.

2、 The peeling process length of the terminal wire shall be standardized and shall not damage the internal core wire.

3、 The stripping process length of terminal wire shall be standardized, and shall not be too short or too long to avoid unqualified terminal crimping.

4、 The terminal tension of the terminal wire must meet the standard.

5、 The tin dipping of the terminal wire shall be full of tin, and there shall be no unqualified phenomena such as broom head, fork, big head, etc.

6、 The welding of terminal wire shall be free from false soldering, missing soldering and wrong soldering.

7、 The size of the bushing of the terminal wire shall comply with the specifications and standards.

8、 The overall test of the terminal wire shall ensure that there is no bad error.

      9、 The packaging and warehousing process of terminal wires shall be standardized and shall not be mixed with defective products.