Automatic Wire Stripping and Crimping Machine - KINGSING

  1. Home page
  2. Services
  3. Industry News

Maintenance method of automatic winding machine

2022-12-21 15:11:22 美工

To ensure the normal operation of the automatic winding machine, the daily actual operation must strictly comply with the requirements of the technical specifications. During the operation, attention should be paid to the equipment maintenance, and regular inspection and maintenance should be carried out for the automatic winding machine.

The latest maintenance work of the automatic winding machine includes the following:

1. Clean the automatic winding machine: clean the dust and oil stain of the mechanism parts of the automatic winding machine. Determine the cleaning cycle according to the working environment.

2. Check and clean the connectors, bolts and guide rails of the automatic winding machine for looseness.

3. Check whether the foot of the machine and equipment of the automatic winding machine is flat, and check the bearing end cap screws and bearing cap screws.

4. Check the development of the belt pulley and its coupling of the transmission system of the fully automatic winding machine, and confirm whether they are cracked or damaged, and whether the connecting buckle wiring is complete.

5. The starting equipment of the weight automatic winding machine shall timely scrub the circuit breaker of the equipment and check whether there is any sign of looseness at each wiring position of the machine and equipment.

6. Check and maintain the rolling bearing of the automatic winding machine and replace the lubricating oil. Change the lubricating fluid regularly according to the running time of the equipment. Under normal circumstances, the full-automatic winding machine needs to be cleaned and replaced with alternate lubricating grease after one year of use.

7. Check the insulation layer of the automatic winding machine. The humidity of the automatic winding machine will endanger the insulation resistance of the insulation layer material. Therefore, it is very important to keep the motor winding dry at all times. Such common faults not only affect the operation of the automatic winding machine, but also seriously endanger life safety. When using the automatic winding machine, always check the grounding resistance, and pay attention to whether the grounding device of the automatic winding machine shell is safe.

8. After the automatic winding machine has been running for one year, the general equipment manufacturer will provide after-sales service for one year. Therefore, more attention should be paid to the maintenance of the equipment after one year. The equipment lines, bolts, guide rails, wiring, and controllers should be checked and replaced regularly. If the equipment maintenance is carried out well, the service life of the equipment can be increased. Create more value for the enterprise.