Automatic Tube Cutting and Chamfering Machine

KS-P520 is an automatic tube cutting and chamfering machine, it can cut the tube in a fixed length and then chamfer both ends of the tube. The tube cutting length and chamfering depth can be set in the touch screen. lt adopts belt feeding mode, since the contact area between the belt and the tube is relatively large, which is beneficial to prevent the tube from slipping during the feeding process, so it can ensure good feeding accuracy.

• Excellent price/performance ratio;

• Stable performance and low failures;

• Reasonable space design and centralized functions;

• Easy to program and operate, the operator can get started quickly without any training;

• Designed by human structural mechanics to reduce fatigue strength;

• With touch screen operation system, all the processing parameters can be adjusted in the screen freely;

• The parameters of different tubes can be saved in different program, when the material is changed, it only needs to switch to the corresponding program, no need to adjust it repeatedly, which greatly improves the production efficiency;

• lt has three working modes: single step mode, cycle mode and automatic mode. In single step mode, the machine runs a single step action every time pressing the start button once, which is convenient for debugging;

• There is emergency stop button at the top of the machine, in case of emergency, the emergency stop button can be pressed immediately to stop running;

• lt adopts belt feeding mode, since the contact area between the belt and the tube is relatively large, which is beneficial to prevent the tube from slipping during the feeding process, so it can ensure good feeding accuracy.